commit 45d340c8394a880f666836dca67c2d484f452977 (HEAD, origin/master, origin/HEAD, master)
Author: ONOS Jenkins User [jenkins@onlab.us]
AuthorDate: Tue Jan 9 01:56:13 2018 +0000
Commit: ONOS Jenkins User [jenkins@onlab.us]
CommitDate: Tue Jan 9 01:56:13 2018 +0000
Starting snapshot 1.13.0-SNAPSHOT
Case 1: Pull onos branch and build onos on Teststation. - PASS
For loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Uninstalling ONOS package - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Checking ONOS service - PASS
- 2.7 Starting ONOS CLI sessions - PASS
- 2.8 Checking that ONOS is ready - PASS
- 2.9 setup the ipv6NeighbourDiscovery - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Discover all hosts - PASS
- 13.1 Discover all hosts using pingall - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV6: Add host intents between h1 and h9 - FAIL
- IPV6: Host intent test failed between two IPV6 hosts
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- DUALSTACK: Host intent test failed between twodual stack host using IPV6
- 1000.3 1HOP: Add host intents between h1 and h3 - PASS
- 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL
This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
- 2000.2 IPV6: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV6 point intent
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Ping6all Passed
- Link Down Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Link Up Passed
- Link Up Topology State Passed
- Link Up Ping6all Failed
- Link Up Intent State Passed
- Remove Intents Passed
- 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
- Assertion Result for Dualstack1 IPV6 with mac address point intents
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Ping6all Passed
- Link Down Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Link Up Passed
- Link Up Topology State Passed
- Link Up Ping6all Failed
- Link Up Intent State Passed
- Remove Intents Passed
- 2000.7 VLAN: Add point intents between h5 and h24 - PASS
- 2000.8 1HOP: Add point intents between h1 and h9 - PASS
Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 3000.1 NOOPTION: Add single point to multi point intents - FAIL
- Assertion results for IPV6 single to multi point intent with no options set
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Ping6all Passed
- Link Down Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Link Up Passed
- Link Up Topology State Passed
- Link Up Ping6all Failed
- Link Up Intent State Passed
- Remove Intents Passed
- 3000.2 IPV6: Add single point to multi point intents - PASS
- 3000.3 IPV6_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV6: Add multi point to single point intents - PASS
- 4000.3 IPV6_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV6: Add host intents between h1 and h9 - PASS
Case 6000: Test Single to Multiple End Point Failure - FAIL
- 6000.1 NOOPTION: test end point failure for multi point to single point intents - FAIL
- Assertion results for IPV6 multi to single point intent end point failure with no options set
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.2 IPV6: test end point failure for multi point to single point intents - FAIL
- Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and MAC addresses
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.3 IPV6_2: test end point faliure for multi point to single point intents - FAIL
- Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.4 VLAN: test end point failure for multi point to single point intents - FAIL
- Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses in the same VLAN
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.5 NOOPTION: test end point failure for single point to multi point intents - FAIL
- Assertion results for IPV6 single to multi point intent end point failure with no options set
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.6 IPV6: test end point failure for single point to multi point intents - FAIL
- Assertion results for IPV6 single to multi point intent end point failure with IPV6 type and MAC addresses
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.7 IPV6_2: test end point failure for single point to multi point intents - FAIL
- Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and no MAC addresses
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
- 6000.8 VLAN: test end point failure for single point to multi point intents - FAIL
- Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and MAC addresses in the same VLAN
- Initial Flow Count Passed
- Initial Flow State Passed
- Initial Pingall Passed
- First Link Down Passed
- Second Link Down Passed
- Link Down Flow Count Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Ping6all Failed
- Link Down Intent State Passed
- Isolation Third Link Down Passed
- Isolation Link Down Flow Count Passed
- Isolation Link Down Flow State Passed
- Isolation Link Down Topology State Passed
- Isolation Link Down Ping6all Failed
- Isolation Link Down Intent State Failed
- First Link Up Passed
- Second Link Up Passed
- Third Link Up Passed
- Link Up Flow Count Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Pingall Passed
- Link Up Intent State Passed
- Remove Intents Passed
Case 14: Stop Mininet - PASS
Stopping the current mininet to start up fresh
- 14.1 Stopping Mininet - PASS