Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 710 Next »

FUNCipv6Intent at 08 Mar 2018 19:42:14

FUNCipv6Intent

commit e5e3c12f6c474ed3f974f299aa903f975e891fcb (HEAD -] master, origin/master, origin/HEAD)
Author: Andrea Campanella [andrea@opennetworking.org]
AuthorDate: Thu Mar 8 11:12:05 2018 -0800
Commit: Andrea Campanella [andrea@opennetworking.org]
CommitDate: Thu Mar 8 22:43:10 2018 +0000

T3: adding padding to flows and group print
--
(cherry picked from commit eb10e4c0d4f85b4399a4e62bc42a47afa8a3364d)

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - FAIL

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Uninstalling ONOS package - PASS (tick)
  • 2.3 Creating ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Set up ONOS secure SSH - PASS (tick)
  • 2.6 Checking ONOS service - PASS (tick)
  • 2.7 Starting ONOS CLI sessions - PASS (tick)
  • 2.8 Checking that ONOS is ready - PASS (tick)
  • 2.9 setup the ipv6NeighbourDiscovery - FAIL (error)
    • Failed to cfg set ipv6NeighborDiscovery

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Discover all hosts - PASS

  • 13.1 Discover all hosts using pingall - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 1000.1 IPV6: Add host intents between h1 and h9 - PASS (tick)
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS (tick)
  • 1000.3 1HOP: Add host intents between h1 and h3 - PASS (tick)
  • 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS (tick)
  • 2000.2 IPV6: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS (tick)
  • 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS (tick)
  • 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS (tick)
  • 2000.7 VLAN: Add point intents between h5 and h24 - PASS (tick)
  • 2000.8 1HOP: Add point intents between h1 and h9 - PASS (tick)

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 3000.1 NOOPTION: Add single point to multi point intents - PASS (tick)
  • 3000.2 IPV6: Add single point to multi point intents - PASS (tick)
  • 3000.3 IPV6_2: Add single point to multi point intents - PASS (tick)
  • 3000.4 VLAN: Add single point to multi point intents - PASS (tick)

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 4000.1 NOOPTION: Add multi point to single point intents - PASS (tick)
  • 4000.2 IPV6: Add multi point to single point intents - PASS (tick)
  • 4000.3 IPV6_2: Add multi point to single point intents - PASS (tick)
  • 4000.4 VLAN: Add multi point to single point intents - PASS (tick)

Case 5000: Test host mobility with host intents - PASS

  • 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS (tick)
  • 5000.2 IPV6: Add host intents between h1 and h9 - PASS (tick)

Case 6000: Test Single to Multiple End Point Failure - FAIL

  • 6000.1 NOOPTION: test end point failure for multi point to single point intents - FAIL (error)
    • Assertion results for IPV6 multi to single point intent end point failure with no options set
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Passed
  • 6000.2 IPV6: test end point failure for multi point to single point intents - FAIL (error)
    • Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and MAC addresses
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Passed
  • 6000.3 IPV6_2: test end point faliure for multi point to single point intents - FAIL (error)
    • Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Passed
  • 6000.4 VLAN: test end point failure for multi point to single point intents - FAIL (error)
    • Assertion results for IPV6 multi to single point intent end point failure with IPV6 type and no MAC addresses in the same VLAN
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Passed
  • 6000.5 NOOPTION: test end point failure for single point to multi point intents - FAIL (error)
    • Assertion results for IPV6 single to multi point intent end point failure with no options set
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Failed
  • 6000.6 IPV6: test end point failure for single point to multi point intents - FAIL (error)
    • Assertion results for IPV6 single to multi point intent end point failure with IPV6 type and MAC addresses
    • Initial Intent State Passed
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Failed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Failed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Failed
  • 6000.7 IPV6_2: test end point failure for single point to multi point intents - FAIL (error)
    • Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and no MAC addresses
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Failed
    • Link Up Pingall Failed
    • Link Up Intent State Failed
    • Remove Intents Failed
  • 6000.8 VLAN: test end point failure for single point to multi point intents - FAIL (error)
    • Assertion results for IPV6 single to multi point intent endpoint failure with IPV6 type and MAC addresses in the same VLAN
    • Initial Flow Count Passed
    • Initial Flow State Passed
    • Initial Pingall Passed
    • First Link Down Passed
    • Second Link Down Passed
    • Link Down Flow Count Passed
    • Link Down Flow State Passed
    • Link Down Topology State Passed
    • Link Down Ping6all Passed
    • Link Down Intent State Passed
    • Isolation Third Link Down Passed
    • Isolation Link Down Flow Count Passed
    • Isolation Link Down Flow State Passed
    • Isolation Link Down Topology State Passed
    • Isolation Link Down Ping6all Failed
    • Isolation Link Down Intent State Failed
    • First Link Up Passed
    • Second Link Up Passed
    • Third Link Up Passed
    • Link Up Flow Count Passed
    • Link Up Flow State Passed
    • Link Up Topology State Passed
    • Link Up Pingall Failed
    • Link Up Intent State Passed
    • Remove Intents Failed

Case 14: Stop Mininet - PASS

Stopping the current mininet to start up fresh

  • 14.1 Stopping Mininet - PASS (tick)
  • No labels