FUNCintent at 14 Jan 2018 14:02:35
commit 60b0059f012f2afd00ccb41555ffb1c5b93623fc (HEAD, origin/onos-1.11, onos-1.11)
Author: Ray Milkey [ray@opennetworking.org]
AuthorDate: Wed Jan 10 16:56:10 2018 -0800
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Wed Jan 10 16:56:10 2018 -0800
Move buck binaries to maven central from vicci
Case 1: Pull onos branch and build onos on Teststation. - PASS
For loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Uninstalling ONOS package - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Checking ONOS service - PASS
- 2.7 Starting ONOS CLI sessions - PASS
Case 10: Start Mininet topology with OF 1.0 switches - PASS
Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly
- 10.1 Starting Mininet topology with OF 1.0 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.0 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Create scapy components - PASS
- 13.1 Create scapy components - No Result
- 13.2 Start scapy components - PASS
Case 15: Discover all hosts using scapy - PASS
- 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
- 15.2 Populate hostsData - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules
- 1000.1 IPV4: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
- 1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
- 1000.8 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - No Result
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 Protected: Add point intents between h1 and h9 - PASS
- 2000.4 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.6 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.7 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.8 VLAN: Add point intents between h5 and h21 - PASS
- 2000.9 VLAN: Add point intents between h5 and h21 - PASS
- 2000.10 1HOP: Add point intents between h1 and h3 - PASS