- Carmelo Cascone / ONF (email@example.com)
- Andrea Campanella / ONF (firstname.lastname@example.org)
- Yi Tseng / ONF (email@example.com)
- Jonghwan Hyun / ONF (firstname.lastname@example.org)
- Wu Shaoyong / ZTE (email@example.com)
Jian Tian / ZTE (firstname.lastname@example.org)
Ke Zhiyong / ZTE (email@example.com)
- Frank Wang / Inspur (firstname.lastname@example.org)
- Minh Pham / UTS (email@example.com)
- Tom Tofigh / AT&T (firstname.lastname@example.org)
- Uyen Chau / ONF (email@example.com)
- Brian O'Connor / ONF (firstname.lastname@example.org)
- Esin Karaman / Netsia (email@example.com)
- Phil Huang / Edgecore (firstname.lastname@example.org)
- Ahbee Wai / Edgecore (email@example.com)
Brigade Mailing List:
Active. Find here the JIRA epic we are currently working on:
Find here the next meeting time and agenda.
Contact the brigade:
P4 is a domain-specific language (DSL) designed to allow the programming of packet forwarding devices. P4 can be used to program different targets such as software switches, FPGA-based NICs or switches based on reconfigurable ASICs. P4 enables protocol-independent programmability at different levels, for example:
Parsing and modification (actions) of new, non-standard headers.
Configure table properties such as size, type of match (exact, ternary, longest-prefix), counters, etc.
Stateful processing, i.e. per-packet custom actions that can access and manipulate state maintained by the switch.
P4 allows programming of many devices in a target-independent manner, using high-level constructs. In principle, P4 programs should be portable. The same program, when compiled for different targets, should produce the same forwarding behavior. Finally, P4 allows for reconfigurability in the field. In other words, once deployed, devices can be reconfigured with a new P4 program to provide support for new forwarding capabilities.
Why should ONOS care about a programming language?
In ONOS we are ultimately interested in the capabilities of networking devices and ways to ease the configuration and control of such capabilities. P4 is becoming the common language spoken by switch vendors and operators to agree on what the data plane can or should do. Indeed, P4 is meant as both a specification language, e.g. to formally specify how a fixed-function switch ASIC works, and a programming language. In its mission to ease the life of operators, and to promote faster innovation in the network, ONOS should be able to understand and potentially speak P4. Understand, to be aware of the capabilities of a given device and to expose higher-level APIs to control them. Speak, to deploy new capabilities, e.g. generating or modifying existing P4 programs, that can be later controlled to satisfy application needs.
Runtime control of P4 devices
P4 is not a protocol or device API for runtime control or configuration, i.e. once a P4 program is deployed to a device, P4 doesn’t tell us how that device can be controlled, for example, to add or remove entries in match+action tables, or to read the value of a counter. How can ONOS control a P4-enabled device? P4Runtime is an effort in the P4 community to create a standard control-plane API portable across targets, they propose a gRPC-based APIs (p4runtime.proto). The brigade will focus on P4Runtime as a southbound control protocol, however, different devices supporting P4 might expose different APIs. Similarly to how ONOS today deals with different flavors of OpenFlow, heterogeneity of control protocol/APIs is abstracted from applications.
Southbound support for P4 RuntimeDONE - Available starting from ONOS 1.11 Enable support for existing applications with any P4 program (via manual ONOS-to-P4 mapping)DONE - Available starting from ONOS 1.11 Extend northbound APIs to support protocol-independence (e.g non-standard match/actions in flow rules)DONE - Available starting from ONOS 1.11
New use cases:
- Rethink northbound APIs to capture enhanced capabilities of programmable data planes
- Services to support incremental reprogramming, i.e. deploy a new P4 program to devices while traffic in flowing.
Optimize existing P4 programs or auto-generate new ones based on application needs and traffic workload.
Here are some pointers to learn more about the work of this brigade and current support for P4 in ONOS:
- P4Runtime on ONOS architecture overview (demo presented at L123 SDN NFV World Congress - video here)
- P4 support in ONOS deep dive (presented at ONOS Build 2017)
- Developer VM and walkthrough of P4Runtime support in ONOS
- ONOS+P4 tutorial exercises (ONOS-P4 Brigade Work Days 2017)
- Controlling P4Runtime-enabled Tofino-based devices with ONOS
- P4-based Trellis (CORD DC fabric), AKA fabric.p4 (with instructions to test on BMv2)
- Offloading VNFs to programmable switches using P4 P4 (talk at ONS North America 2018)
- ONOS-P4 Brigade Work Days 2017 (past event)
To learn more about P4Runtime:
- Announcing P4Runtime – A contribution by the P4 API Working Group (Blog post)
- Other P4Runtime resources
How to get involved:
Support for P4 will affect the whole ONOS platform, from the southbound to the northbound. The P4 brigade is looking for members willing to contribute! Subscribe to the P4 mailing list and introduce yourself or contact Carmelo Cascone (firstname.lastname@example.org) or William Quiviger (email@example.com) if you are interested.