Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

FUNCintent at 16 Jul 2015 17:49:10

Case 1: Constructing test variables and building ONOS package - PASS

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 11: - PASS

  • 11.1 Starting Mininet Topology - PASS (tick)

Case 12: Assign switches to controllers - PASS

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Discover all hosts - PASS

  • 13.1 Discover all hosts using pingall - PASS (tick)

Case 1000: Add host intents between 2 host - FAIL

  • 1000.1 IPV4: Add host intents between h1 and h9 - FAIL (error)
    • IPV4: Add host intent failed
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL (error)
    • DUALSTACK1: Add host intent failed
  • 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL (error)
    • DUALSTACK2: Add host intent failed
  • 1000.4 1HOP: Add host intents between h1 and h3 - FAIL (error)
    • 1HOP: Add host intent failed
  • 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL (error)
    • VLAN1: Add vlan host intent failed
  • 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS (tick)

Case 2000: Add point intents between 2 devices - FAIL

  • 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL (error)
    • NOOPTION: Add point intent failed
  • 2000.2 IPV4: Add point intents between h1 and h9 - FAIL (error)
    • IPV4: Add point intent failed
  • 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL (error)
    • IPV4_2: Add point intent failed
  • 2000.4 SDNIP-TCP: Add point intents between h1 and h9 - FAIL (error)
    • SDNIP-TCP: Add point intent failed
  • 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL (error)
    • SDNIP-ICMP: Add point intent failed
  • 2000.6 DUALSTACK1: Add point intents between h1 and h9 - FAIL (error)
    • DUALSTACK1: Add point intent failed
  • 2000.7 VLAN: Add point intents between h5 and h21 - FAIL (error)
    • VLAN: Add point intent failed
  • 2000.8 1HOP: Add point intents between h1 and h3 - FAIL (error)
    • 1HOP: Add point intent failed

Case 3000: Add single point to multi point intents between devices - FAIL

  • 3000.1 NOOPTION: Add single point to multi point intents - FAIL (error)
    • NOOPTION: Failed to add single point to multi point intents
  • 3000.2 IPV4: Add single point to multi point intents - FAIL (error)
    • IPV4: Failed to add single point to multi point intents
  • 3000.3 IPV4_2: Add single point to multi point intents - FAIL (error)
    • IPV4_2: Failed to add single point to multi point intents
  • 3000.4 VLAN: Add single point to multi point intents - FAIL (error)
    • VLAN: Failed to add single point to multi point intents

Case 4000: Add multi point to single point intents between devices - FAIL

  • 4000.1 NOOPTION: Add multi point to single point intents - FAIL (error)
    • NOOPTION: Failed to add multi point to single point intents
  • 4000.2 IPV4: Add multi point to single point intents - FAIL (error)
    • IPV4: Failed to add multi point to single point intents
  • 4000.3 IPV4_2: Add multi point to single point intents - FAIL (error)
    • IPV4_2: Failed to add multi point to single point intents
  • 4000.4 VLAN: Add multi point to single point intents - FAIL (error)
    • VLAN: Failed to add multi point to single point intents
  • No labels