Master - HA Cluster Restart

commit 4b519416461a09c662dc91204e16e18bb116a9be (HEAD, origin/master, origin/HEAD, master)
Author: Flavio Castro [castro.flaviojr@gmail.com]
AuthorDate: Fri Jul 24 12:57:59 2015 -0700
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Fri Jul 24 23:20:45 2015 +0000

ONOS-2315 adding auto-complete to the CLI

Case 1: Setting up test environment - PASS

Setup the test environment including installing ONOS, starting Mininet and ONOScli sessions.

• 1.1 Create cell file - No Result
• 1.2 Applying cell variable to environment - No Result
• 1.3 Starting Mininet - PASS
• 1.4 Git checkout and pull master - No Result
• 1.5 Using mvn clean install - PASS
• 1.6 Creating ONOS package - PASS
• 1.7 Installing ONOS package - PASS
• 1.8 Checking if ONOS is up yet - PASS
• 1.9 App Ids check - PASS

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

• 2.1 Assign switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 3: Adding host Intents - FAIL

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - FAIL
• Reactive Pingall failed, one or more ping pairs failed
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - PASS
• 8.8 Device information is correct - PASS
• 8.9 Links are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - PASS
• 4.2 Check Intent state - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 5: Setting up and gathering data for current state - PASS

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch from each controller - PASS
• 5.3 Check for consistency in roles from each controller - PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 Check for consistency in Intents from each controller - PASS
• 5.6 Get the flows from each controller - PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Collecting topology information from ONOS - No Result
• 5.11 Host view is consistent across ONOS nodes - PASS
• 5.12 Each host has an IP address - PASS
• 5.13 Cluster view is consistent across ONOS nodes - PASS
• 5.14 Cluster view correct across ONOS nodes - PASS
• 5.15 Comparing ONOS topology to MN - PASS
• 5.16 Device information is correct - PASS
• 5.17 Links are correct - PASS
• 5.18 Hosts are correct - PASS

Case 14: Start Leadership Election app - PASS

• 14.1 Install leadership election app - PASS
• 14.2 Run for election on each node - PASS
• 14.3 Check that each node shows the same leader - PASS

Case 16: Install Primitives app - PASS

• 16.1 Install Primitives app - PASS

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

• 17.1 Increment then get a default counter on each node - PASS
• 17.2 Get then Increment a default counter on each node - PASS
• 17.3 Counters we added have the correct values - PASS
• 17.4 Add -8 to then get a default counter on each node - PASS
• 17.5 Add 5 to then get a default counter on each node - PASS
• 17.6 Get then add 5 to a default counter on each node - PASS
• 17.7 Counters we added have the correct values - PASS
• 17.8 Increment and get an in-memory counter on each node - PASS
• 17.9 Get then Increment a in-memory counter on each node - PASS
• 17.10 Counters we added have the correct values - PASS
• 17.11 Add -8 to then get a in-memory counter on each node - PASS
• 17.12 Add 5 to then get a in-memory counter on each node - PASS
• 17.13 Get then add 5 to a in-memory counter on each node - PASS
• 17.14 Counters we added have the correct values - PASS
• 17.15 Check counters are consistant across nodes - PASS
• 17.16 Counters we added have the correct values - PASS
• 17.17 Distributed Set get - PASS
• 17.18 Distributed Set size - PASS
• 17.19 Distributed Set add() - PASS
• 17.20 Distributed Set addAll() - PASS
• 17.21 Distributed Set contains() - PASS
• 17.22 Distributed Set containsAll() - PASS
• 17.23 Distributed Set remove() - PASS
• 17.24 Distributed Set removeAll() - PASS
• 17.25 Distributed Set addAll() - PASS
• 17.26 Distributed Set clear() - PASS
• 17.27 Distributed Set addAll() - PASS
• 17.28 Distributed Set retain() - PASS

Case 6: Restart entire ONOS cluster - PASS

• 6.1 Killing ONOS nodes - PASS
• 6.2 Checking if ONOS is up yet - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - FAIL
• ONOS nodes have different views of clusters
• 8.7 There is only one SCC - FAIL
• ONOS shows 12 SCCs
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Checking ONOS nodes - PASS

Case 3: Adding host Intents - FAIL

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - FAIL
• Reactive Pingall failed, one or more ping pairs failed
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - FAIL
• Intent ECM anti-entropy took too long

Case 7: Running ONOS Constant State Tests - FAIL

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - PASS
• 7.4 Get the intents and compare across all nodes - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• 7.7 Leadership Election is still functional - PASS

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 15: Check that Leadership Election is still functional - PASS

• 15.1 Run for election on each node - PASS
• 15.2 Check that each node shows the same leader - PASS
• 15.3 Find current leader and withdraw - PASS
• 15.4 Make sure new leader is elected - PASS
• 15.5 Run for election on old leader( just so everyone is in the hat ) - PASS
• 15.6 Leader did not change when old leader re-ran - PASS

Case 17: Check for basic functionality with distributed primitives - FAIL

Test the methods of the distributed primitives (counters and sets) throught the cli

• 17.1 Increment then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.2 Get then Increment a default counter on each node - FAIL
• Error incrementing default counter
• 17.3 Counters we added have the correct values - FAIL
• Added counters are incorrect
• 17.4 Add -8 to then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.5 Add 5 to then get a default counter on each node - FAIL
• Error incrementing default counter
• 17.6 Get then add 5 to a default counter on each node - FAIL
• Error incrementing default counter
• 17.7 Counters we added have the correct values - FAIL
• Added counters are incorrect
• 17.8 Increment and get an in-memory counter on each node - PASS
• 17.9 Get then Increment a in-memory counter on each node - PASS
• 17.10 Counters we added have the correct values - FAIL
• Added counters are incorrect
• 17.11 Add -8 to then get a in-memory counter on each node - FAIL
• Error incrementing in-memory counter
• 17.12 Add 5 to then get a in-memory counter on each node - FAIL
• Error incrementing in-memory counter
• 17.13 Get then add 5 to a in-memory counter on each node - PASS
• 17.14 Counters we added have the correct values - FAIL
• Added counters are incorrect
• 17.15 Check counters are consistant across nodes - FAIL
• ONOS Counters are inconsistent across nodes
• 17.16 Counters we added have the correct values - FAIL
• Added counters are incorrect
• 17.17 Distributed Set get - PASS
• 17.18 Distributed Set size - PASS
• 17.19 Distributed Set add() - PASS
• 17.20 Distributed Set addAll() - PASS
• 17.21 Distributed Set contains() - PASS
• 17.22 Distributed Set containsAll() - PASS
• 17.23 Distributed Set remove() - PASS
• 17.24 Distributed Set removeAll() - FAIL
• Set removeAll was incorrect
• 17.25 Distributed Set addAll() - PASS
• 17.26 Distributed Set clear() - PASS
• 17.27 Distributed Set addAll() - FAIL
• Set addAll was incorrect
• 17.28 Distributed Set retain() - PASS

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 12 SCCs
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 12 SCCs
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 11: Killing a switch to ensure it is discovered correctly - PASS

• 11.1 Kill s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 12 SCCs
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 12: Adding a switch to ensure it is discovered correctly - PASS

• 12.1 Add back s5 - PASS

Case 8: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN - No Result
• 8.2 Collecting topology information from ONOS - PASS
• 8.3 Hosts view is consistent across all ONOS nodes - PASS
• 8.4 Hosts information is correct - PASS
• 8.5 Host attachment points to the network - PASS
• 8.6 Clusters view is consistent across all ONOS nodes - PASS
• 8.7 There is only one SCC - FAIL
• ONOS shows 12 SCCs
• 8.8 Device information is correct - FAIL
• Device information is incorrect
• 8.9 Links are correct - FAIL
• Links are incorrect
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sendind traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Ping across added host intents - FAIL
• Intents have not been installed correctly, pings failed.
• 4.2 Check Intent state - FAIL
• Intents are not all in INSTALLED state
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 13: Test Cleanup - PASS

• 13.1 Killing tcpdumps - No Result
• 13.2 Stopping Mininet - PASS
• 13.3 Checking ONOS Logs for errors - No Result