Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 48 Next »

USECASE_SdnipFunction at 26 Sep 2015 08:12:27

Case 100: - PASS

  • 100.1 Starting Mininet Topology - PASS (tick)
  • 100.2 Connect switches to controller - PASS (tick)
  • 100.3 Set up tunnel from Mininet node to onos node - No Result (warning)
commit c59aa0d8e54ffa48b679e465c0f2847dd04cb023 (HEAD, origin/master, origin/HEAD, master)
Author: alshabib [alshabibi.ali@gmail.com]
AuthorDate: Fri Sep 25 16:10:38 2015 -0700
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Sat Sep 26 03:03:12 2015 +0000

stops an instance from removing packet requests upon deactivation

Case 101: Setting up test environment - PASS

  • 101.1 Applying cell variable to environment - No Result (warning)
  • 101.2 Git pull - No Result (warning)
  • 101.3 Using mvn clean install - No Result (warning)
  • 101.4 Creating ONOS package - No Result (warning)
  • 101.5 Installing ONOS package - No Result (warning)
  • 101.6 Checking if ONOS is up yet - PASS (tick)
  • 101.7 Get links in the network - No Result (warning)

Case 102: Loading the methods from other Python file - PASS

Case 1: This case is to check ping between BGP peers and speakers - PASS

Case 2: This case is to check point-to-point intents - PASS

  • 2.1 Get point-to-point intents from ONOS CLI - PASS (tick)

Case 3: This case is to check routes and intents to all BGP peers - PASS

  • 3.1 Check routes installed - PASS (tick)
  • 3.2 Check MultiPointToSinglePointIntent intents installed - PASS (tick)
  • 3.3 Check whether all flow status are ADDED - PASS (tick)

Case 4: This case is to check ping for each route, all hosts behind BGP peers - PASS

Case 5: This case is to bring down links and check routes/intents - PASS

  • 5.1 Check M2S intents installed - PASS (tick)
  • 5.2 Check M2S intents installed - PASS (tick)
  • 5.3 Check M2S intents installed - PASS (tick)
  • 5.4 Check ping between each host pair - PASS (tick)

Case 6: This case is to bring up links and check routes/intents - PASS

  • 6.1 Check M2S intents installed - PASS (tick)
  • 6.2 Check M2S intents installed - PASS (tick)
  • 6.3 Check M2S intents installed - PASS (tick)
  • 6.4 Check ping between each host pair - PASS (tick)

Case 7: This case is to stop 1 edge switch,check P-2-P and M-2-S intents, ping test - PASS

  • 7.1 Check P2P intents installed - PASS (tick)
  • 7.2 Check ping between hosts behind BGP peers - PASS (tick)
  • 7.3 Check ping between BGP peers and speakers - PASS (tick)
  • 7.4 Check whether all flow status are ADDED - PASS (tick)

Case 8: This case is to start the switch which was shut down in CASE7,check P-2-P and M-2-S intents, ping test - PASS

  • 8.1 Check P2P intents installed - PASS (tick)
  • 8.2 Check ping between each host pair - PASS (tick)
  • No labels