Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
FUNCoptical at 15 Nov 2015 05:53:15
commit 4832784ed4032361f4c776b79a1de9c013c41226 (HEAD, origin/master, origin/HEAD, master)
Author: Jonathan Hart [jono@onlab.us]
AuthorDate: Tue Nov 10 16:09:22 2015 -0800
Commit: Jonathan Hart [jono@onlab.us]
CommitDate: Fri Nov 13 17:44:34 2015 -0800
Add configuration for default vlan
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - PASS
Compare topology elements between Mininet and ONOS
- 23.1 Conmparing Mininet topology to ONOS topology - PASS
Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - FAIL
- Failed to add point intents
- Skipping the rest of this case.
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - FAIL
- Some of the intents are not in INSTALLED state
- 32.2 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - PASS
Compare topology elements between Mininet and ONOS
- 23.1 Conmparing Mininet topology to ONOS topology - PASS
Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - FAIL
- Failed to add point intents
- Skipping the rest of this case.
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - FAIL
- Some of the intents are not in INSTALLED state
- 32.2 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS