Introduction
This page provides information on how to use and understand the PathPainter Application for the ONOS Web UI.
The PathPainter application allows the user to see the different type of paths between two entities in ONOS, regarding of their type.
The application has three different modes for three different type of paths:
- shortest were the shortest paths between the source and the destination are highlighted
- disjoint were the disjoint paths between the source and the destination are highlighted
- geoPath where the geographically shortest path is highlighted.
Usage
In order to use the PathPainter application you need to have onos installed and configured. In the ONOS console you should first start the gui:
$: onos-gui
Once the GUI is stated up in your browser you should activate the pathpainter app by opening the left-side panel, going to applications, findin org.onosproject.pathpainter and cliking activate button on the upper-right side corner.
You can than return to the topology view and open the toolbar panel in the bottom left side of the screen by pressing the dot key.
Once you have the toolbar open you should see the pathPainter Icon (todo insert top icon). Clicking on the Icon will activate the application GUI overlay. While in the PathPainter application there are different key mappings and buttons for different functionalities.
Button | Key | Functionality |
---|---|---|
1 | Set source device | |
2 | Set destination device | |
3 | Swap source and destination device | |
4 | Set the path computation to shortest | |
5 | Set the path computation to disjoint | |
6 | Set the path computation to geoData | |
Right arrow | ||
Left arrow |