Master-FUNCipv6Intent

commit 74f2d531ca29c47e3ba4e8df8c771a1d742cc6e3 (HEAD, origin/master, origin/HEAD, master)
Author: lishuai [lishuai12@huawei.com]
AuthorDate: Thu Dec 10 17:03:34 2015 +0800
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Thu Dec 10 09:22:30 2015 +0000

[ONOS-3585] Add the cli of setting external port name.

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS
• 2.7 setup the ipv6NeighbourDiscovery - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
• 2000.2 IPV6: Add point intents between h1 and h9 - PASS
• 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS