Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

FUNCipv6Intent at 21 Dec 2015 15:30:01

commit b172d5fc8eef7877a1a3beec49e22221ceb069e6 (HEAD, origin/master, origin/HEAD, master)
Author: kmcpeake [kmcpeake@btisystems.com]
AuthorDate: Thu Dec 10 11:30:43 2015 +0000
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Sun Dec 20 15:35:59 2015 +0000

[ONOS-3203] End-to-end demo of Fault Management via SNMP.
--
There is still code cleanup that could be done, but aim of this commit is an end-to-end proof of concept.

To demonstrate :

1) /opt/onos/bin/onos-service
onos] app activate org.onosproject.snmp
onos] app activate org.onosproject.faultmanagement

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)
  • 2.7 setup the ipv6NeighbourDiscovery - PASS (tick)

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS (tick)
  • 2000.2 IPV6: Add point intents between h1 and h9 - PASS (tick)
  • 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS (tick)

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)
  • No labels