Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 62 Next »

FUNCipv6Intent at 31 Jan 2016 23:03:50

commit 4124bc365f7abe0c4271e0b09065e66d88a0241c (HEAD, origin/master, origin/HEAD, master)
Author: Madan Jampani [madan.jampani@gmail.com]
AuthorDate: Sat Jan 30 23:53:56 2016 -0800
Commit: Madan Jampani [madan.jampani@gmail.com]
CommitDate: Sat Jan 30 23:53:56 2016 -0800

LEADER_ELECTOR distributed primitive enum type

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - FAIL

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)
  • 2.7 setup the ipv6NeighbourDiscovery - FAIL (error)
    • Failed to cfg set ipv6NeighborDiscovery

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - FAIL (error)
    • Assertion Result for NOOPTION point intent
    • Initial Ping6 pair Failed
    • Remove Intents Passed
  • 2000.2 IPV6: Add point intents between h1 and h9 - FAIL (error)
    • Assertion Result for IPV6 point intent
    • Initial Ping6 pair Failed
    • Remove Intents Passed
  • 2000.3 IPV6_2: Add point intents between h1 and h9 - FAIL (error)
    • Assertion Result for IPV6 no mac address point intents
    • Initial Ping6 pair Failed
    • Remove Intents Passed

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)
  • No labels