Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
FUNCflow at 01 Mar 2016 15:39:47
Case 1: Constructing test variables and building ONOS package - PASS
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Setup mininet and compare ONOS topology view to Mininet topology - PASS
Start mininet with custom topology and compare topology elements between Mininet and ONOS
- 10.1 Setup Mininet Topology - PASS
- 10.2 Assign switch to controller - PASS
- 10.3 Comparing MN topology to ONOS topology - PASS
Case 1000: Verify flow MAC selectors are correctly compiled - PASS
Install two flows with only MAC selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the MAC src and dst.
- 1000.1 Add flows with MAC addresses as the only selectors - PASS
- 1000.2 Check flows are in the ADDED state - PASS
- 1000.3 Check flows are in Mininet's flow table - PASS
- 1000.4 Send a packet to verify the flows are correct - PASS
Case 2000: Delete flows that were added through rest - PASS
- 2000.1 Deleting flows - PASS
Case 1100: Verify flow IP selectors are correctly compiled - PASS
Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.
- 1100.1 Add flows with IPv4 addresses as the only selectors - PASS
- 1100.2 Check flow is in the ADDED state - PASS
- 1100.3 Check flows are in Mininet's flow table - PASS
- 1100.4 Send a packet to verify the flow is correct - PASS
Case 2000: Delete flows that were added through rest - PASS
- 2000.1 Deleting flows - PASS
Case 1200: Verify VLAN selector is correctly compiled - PASS
Install one flow with only the VLAN selector specified, then verify the flow is added in ONOS, and finally broadcast a packet with the correct VLAN tag.
- 1200.1 Add a flow with the VLAN tag as the only selector - PASS
- 1200.2 Check flows are in the ADDED state - PASS
- 1200.3 Check flows are in Mininet's flow table - PASS
- 1200.4 Send a packet to verify the flow are correct - PASS
Case 2000: Delete flows that were added through rest - PASS
- 2000.1 Deleting flows - PASS
Case 1300: Verify the MPLS selector is correctly compiled on the flow. - PASS
Install one flow with an MPLS selector, verify the flow is added in ONOS, and finally send a packet via scapy that has a MPLS label.
- 1300.1 Add a flow with a MPLS selector - PASS
- 1300.2 Check flow is in the ADDED state - PASS
- 1300.3 Check flows are in Mininet's flow table - PASS
- 1300.4 Send a packet to verify the flow is correct - PASS
Case 2000: Delete flows that were added through rest - PASS
- 2000.1 Deleting flows - PASS
Case 1400: Verify the TCP selector is correctly compiled on the flow - PASS
Install a flow with only the TCP selector specified, verify the flow is added in ONOS, and finally send a TCP packet to verify the TCP selector is compiled correctly.
- 1400.1 Add a flow with a TCP selector - PASS
- 1400.2 Check flow is in the ADDED state - PASS
- 1400.3 Check flows are in Mininet's flow table - PASS
- 1400.4 Send a packet to verify the flow is correct - PASS
Case 2000: Delete flows that were added through rest - PASS
- 2000.1 Deleting flows - PASS
Case 1500: Verify the UDP selector is correctly compiled on the flow - PASS
Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.
- 1500.1 Add a flow with a UDP selector - PASS
- 1500.2 Check flow is in the ADDED state - PASS
- 1500.3 Check flows are in Mininet's flow table - PASS
- 1500.4 Send a packet to verify the flow is correct - PASS