Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 200 Next »

FUNCoptical at 13 May 2016 21:38:32

commit 8fb4ad74339f679f61bf3e8de13e6e07bcfedd5d (HEAD, origin/master, origin/HEAD, master)
Author: Sho SHIMIZU [sshimizu@us.fujitsu.com]
AuthorDate: Fri May 13 15:53:44 2016 -0700
Commit: Sho SHIMIZU [sshimizu@us.fujitsu.com]
CommitDate: Fri May 13 15:53:44 2016 -0700

Create default contstructor for serialization

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - PASS

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - PASS (tick)
  • 31.2 Ping h1 and h5 - PASS (tick)

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - PASS (tick)
  • 32.2 Pinging h1 and h2 - PASS (tick)
  • 32.3 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - PASS (tick)
  • 31.2 Ping h1 and h5 - FAIL (error)
    • Failed to ping between h1 and h5

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - PASS (tick)
  • 32.2 Pinging h1 and h2 - FAIL (error)
    • Pinged failed between h1 and h2
  • 32.3 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - PASS

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - PASS (tick)
  • 31.2 Ping h1 and h5 - PASS (tick)

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - PASS (tick)
  • 32.2 Pinging h1 and h2 - FAIL (error)
    • Pinged failed between h1 and h2
  • 32.3 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - PASS

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - PASS (tick)
  • 31.2 Ping h1 and h5 - PASS (tick)

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - PASS (tick)
  • 32.2 Pinging h1 and h2 - PASS (tick)
  • 32.3 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)
  • No labels