System Test Setup Overview
Created by: 
; Last Modified by: ; Last Update:
Components in this Setup:
- Jenkins CI system (Optional - if you need to have automated build job set up; else, all the test cases can be driven from TestStation.);
- Wiki (Atlassian Confluence), or other publishing services (Optional - if you don't need to publish test results);
- Gerrit Repo - gerrit.onosproject.org; this is the git repository for both onos and OnosSystemTest;
- TestStation - runs "OnosSystemTest/TestON"; optionally onos Bench and Mininet. Required: "OC" environment variables are configure in the host to run test scripts.
- ONOS cells - each cell is a node running ONOS - the number of cells needed depending on your test cases;
- SDN network - this is either a Mininet-emulated network, or physical network.
Example Test Setup Procedure:
This guide will help you install TestON, configure your environment, and run a sample test with a three node cluster.
Requirements:
- ONOS 1.3 or higher (recommended) must be correctly installed. Follow this guide to install ONOS.
- The correct Mininet distribution must be installed. Follow this guide.
Clone "OnosSystemtest" to TestStation
$ git clone https://gerrit.onosproject.org/OnosSystemTest |
Set your cell. The sample test requires a 3-node cell. Follow this guide if you are having trouble setting your cell.
NOTE: Make sure ONOS is update-to-date and you build it before running the test.
Run the sample test.
$ cd ~/OnosSystemTest/TestON/bin/
$ ./cli.py run SAMPstartTemplate |