This is an archive of the ONOS 1.2 wiki. For the current ONOS wiki, look here.

Welcome to the ONOS tutorial!

 

In this tutorial, you’ll complete a set of exercises designed to explain the main concepts of ONOS, our distributed network operating system. Soon, you'll understand how to use the basic features of ONOS.

To get you started quickly, this tutorial is distributed as a preconfigured virtual machine with the needed software. Just run the VM in VirtualBox using the instructions in the next section.



Introduction

Pre-requisites

You will need a computer with at least 2GB of RAM and at least 5GB of free hard disk space. A faster processor or solid-state drive will speed up the virtual machine boot time, and a larger screen will help to manage multiple terminal windows.

The computer can run Windows, Mac OS X, or Linux – all work fine with VirtualBox, the only software requirement.

To install VirtualBox, you will need administrative access to the machine.

The tutorial instructions require prior knowledge of SDN in general, and OpenFlow and Mininet in particular. So please first complete the OpenFlow tutorial and the Mininet walkthrough. Although not a requirement, completing the FlowVisor tutorial before starting this one is highly recommended. Also being familiar with Apache Karaf would be helpful although not entirely required.

Stuck? Found a bug? Questions?

Email us if you’re stuck, think you’ve found a bug, or just want to send some feedback. Please have a look at the guidelines to learn how to efficiently submit a bug report.

Set up your environment

Install required software

You will need to acquire two files: a VirtualBox installer and the Tutorial VM. 

After you have downloaded VirtualBox, install it, then go to the next section to verify that the VM is working on your system.

Create Virtual Machine

Double-click on the downloaded tutorial zipfile. This will give you an OVF file. Open the OVF file, this will open virtual box with an import dialog.

Click on import. When the import is finished start the VM and log in using:

USERNAME: tutorial1

PASSWORD: tutorial1

Important Command Prompt Notes

In this tutorial, commands are shown along with a command prompt to indicate the subsystem for which they are intended.

For example,

onos>

indicates that you are in the ONOS command line, whereas

mininet>

indicates that you are in mininet.

 

Resetting

We have provided a simple mechanism which allows you to restart the tutorial from scratch. Simply, click on the 'Reset' icon on your desktop and this will reset ONOS to its initial state. It'll take a few seconds for ONOS to restart and during that time you may not be able to launch your ONOS cli. 

Start Mininet

We’ll be using the same physical topology for all exercises, so now is a good time to start Mininet. The network is a simple set of six switches where the outer switches are connected to two interconnection switches, which are connected together. The diagram below shows the topology.



Each of the outer switches has six hosts attached to it. To start mininet with this topology, simply double click on the Mininet icon on your desktop. To exit mininet, type CTRL-D or exit in the mininet prompt.

Start ONOS

Double-click the "Reset" icon on the desktop now. This will ensure the environment is clean and will start up ONOS.

Reactive Forwarding

Start by opening a console onto ONOS, you can do this by double clicking on the ONOS icon.

No pings? Why?

 In this exercise, we are going to run a sample app shipped with ONOS. Reactive Forwarding is a simple application which installs flows for every packet in that arrives at the controller. Go to your mininet prompt and do the following.

mininet> h11 ping h41

 

You will notice that the ping fails as shown below.

mininet> h11 ping -c3 h41
PING 10.0.0.19 (10.0.0.19) 56(84) bytes of data.
From 10.0.0.1 icmp_seq=1 Destination Host Unreachable
From 10.0.0.1 icmp_seq=2 Destination Host Unreachable
From 10.0.0.1 icmp_seq=3 Destination Host Unreachable
--- 10.0.0.19 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2009ms

 

So why did the ping fail? Well we didn't load the reactive forwarding application. Indeed, if you list the loaded applications you will see the following:

onos> list
110 | Active |  80 | 1.0.0.SNAPSHOT   | onos-rest                             
116 | Active |  80 | 1.0.0.SNAPSHOT   | onos-of-api                           
117 | Active |  80 | 1.0.0.SNAPSHOT   | onos-of-ctl                           
118 | Active |  80 | 1.0.0.SNAPSHOT   | onos-lldp-provider                    
119 | Active |  80 | 1.0.0.SNAPSHOT   | onos-host-provider                    
120 | Active |  80 | 1.0.0.SNAPSHOT   | onos-of-provider-device               
121 | Active |  80 | 1.0.0.SNAPSHOT   | onos-of-provider-packet               
122 | Active |  80 | 1.0.0.SNAPSHOT   | onos-of-provider-flow                 
136 | Active |  80 | 1.0.0.SNAPSHOT   | onos-cli                              
137 | Active |  80 | 8.1.15.v20140411 | Jetty :: Websocket                    
138 | Active |  80 | 1.0.0.SNAPSHOT   | onos-gui                              
151 | Active |  80 | 1.0.0.SNAPSHOT   | onos-core-net                         
152 | Active |  80 | 1.0.0.SNAPSHOT   | onos-core-trivial

As you can see above, there is no reactive forwarding application loaded. Let's see how we load it.

Make it so, Number one

In your ONOS window, do

onos> feature:install onos-app-fwd

 

Then, in a mininet window run the ping again, just this time don't limit the number of pings.

mininet> h11 ping h41

This time the ping is flowing:

mininet> h11 ping h41
PING 10.0.0.19 (10.0.0.19) 56(84) bytes of data.
64 bytes from 10.0.0.19: icmp_req=1 ttl=64 time=9.12 ms
64 bytes from 10.0.0.19: icmp_req=2 ttl=64 time=0.892 ms
64 bytes from 10.0.0.19: icmp_req=3 ttl=64 time=0.075 ms
64 bytes from 10.0.0.19: icmp_req=4 ttl=64 time=0.068 ms

Start stop start stop....

You have now seen that you can load applications into ONOS dynamically. Actually you can also interrupt applications while they are running so, for example, let's stop the reactive forwarding application.

onos> stop onos-app-fwd

Observe that the ping has now stopped. This is because when the reactive forwarding application is unloaded, it cleans up after itself by removing the rules that it has pushed. We'll talk more about this in the next section. For now, let's restart the reactive forwarding application.

onos> start onos-app-fwd

...and the ping restarts (wink) 

ONOS CLI commands

ONOS has many CLI commands. In this section, we will go through some of the most useful commands. This section may also serve as a CLI reference for you during this tutorial. While we will explain some of the ONOS CLI commands here you can find an exhaustive list by running:

onos> help onos

or more information about an individual command adding --help to any command. Also most commands have autocompletion to help you find the parameters quickly and easily.

Devices command

An SDN Controller would be nothing without devices to control. Luckily, ONOS has a convenient command to list the device currently known in the system. Running

onos> devices

will return the following information,

onos> devices
id=of:0000000000000001, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10
id=of:0000000000000002, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10
id=of:000000000000000b, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10
id=of:000000000000000c, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10
id=of:000000000000000d, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10
id=of:000000000000000e, available=true, role=MASTER, type=SWITCH, mfr=Nicira, Inc., hw=Open vSwitch, sw=2.1.3, serial=None, protocol=OF_10

which consists of a device id, and a boolean value which indicates whether this devices is currently up. You also get the type of device and well as it's role relationship with this ONOS instance.

Links command

 The links command is used to list the links detected by ONOS. At the ONOS prompt run

onos> links

and you should get the following output:

onos> links
src=of:000000000000000e/1, dst=of:0000000000000001/5, type=DIRECT, state=ACTIVE
src=of:000000000000000d/1, dst=of:0000000000000001/4, type=DIRECT, state=ACTIVE
src=of:000000000000000e/2, dst=of:0000000000000002/5, type=DIRECT, state=ACTIVE
src=of:000000000000000c/1, dst=of:0000000000000001/3, type=DIRECT, state=ACTIVE
src=of:000000000000000d/2, dst=of:0000000000000002/4, type=DIRECT, state=ACTIVE
src=of:000000000000000b/1, dst=of:0000000000000001/2, type=DIRECT, state=ACTIVE
src=of:000000000000000c/2, dst=of:0000000000000002/3, type=DIRECT, state=ACTIVE
src=of:000000000000000b/2, dst=of:0000000000000002/2, type=DIRECT, state=ACTIVE
src=of:0000000000000002/2, dst=of:000000000000000b/2, type=DIRECT, state=ACTIVE
src=of:0000000000000001/2, dst=of:000000000000000b/1, type=DIRECT, state=ACTIVE
src=of:0000000000000002/3, dst=of:000000000000000c/2, type=DIRECT, state=ACTIVE
src=of:0000000000000001/3, dst=of:000000000000000c/1, type=DIRECT, state=ACTIVE
src=of:0000000000000002/4, dst=of:000000000000000d/2, type=DIRECT, state=ACTIVE
src=of:0000000000000001/4, dst=of:000000000000000d/1, type=DIRECT, state=ACTIVE
src=of:0000000000000002/5, dst=of:000000000000000e/2, type=DIRECT, state=ACTIVE
src=of:0000000000000001/5, dst=of:000000000000000e/1, type=DIRECT, state=ACTIVE
src=of:0000000000000002/1, dst=of:0000000000000001/1, type=DIRECT, state=ACTIVE
src=of:0000000000000001/1, dst=of:0000000000000002/1, type=DIRECT, state=ACTIVE

The output shows you the list of discovered links. Reported links are formatted by source device-port pair to destination device-port pair. The 'type' field indicates whether the link is a direct connection between two devices or not. 

Hosts command

A network without hosts is a little like a city without bars, it would be a ridiculously boring place. Fortunately, ONOS has the ability to list the hosts (as opposed to bars, although that would be a great feature) currently in the system.

onos> hosts

with this output:

onos> hosts
id=00:00:00:00:00:01/-1, mac=00:00:00:00:00:01, location=of:000000000000000b/3, vlan=-1, ip(s)=[10.0.0.1]
id=00:00:00:00:00:13/-1, mac=00:00:00:00:00:13, location=of:000000000000000e/3, vlan=-1, ip(s)=[10.0.0.19]

Which displays the hosts' id as well as its mac address and where in the network it is connected. The '-1' in the id field is used to display the vlan information, in this case there is no vlan (wink).

Flows command

The flows command allows you to observe which flow entries are currently registered in the system. Flow entries may be in several states:

  • PENDING_ADD - The flow has been submitted and forwarded to the switch.
  • ADDED - The flow has been added to the switch.
  • PENDING_REMOVE - The request to remove the flow has been submitted and forwarded to the switch.
  • REMOVED - The rule has been removed.

So let's start some traffic but going to the mininet window and running

mininet> h11 ping h41

then in the ONOS window let's run the flows command

onos> flows

you should see the following output

deviceId=of:0000000000000001, flowRuleCount=1
   id=30000b889cb32, state=ADDED, bytes=8722, packets=89, duration=89, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}, IN_PORT{port=2}]
      treatment=[OUTPUT{port=5}]
deviceId=of:0000000000000002, flowRuleCount=1
   id=30000b889cf4d, state=ADDED, bytes=8624, packets=88, duration=88, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}, IN_PORT{port=5}]
      treatment=[OUTPUT{port=2}]
deviceId=of:000000000000000b, flowRuleCount=2
   id=30000b88a8321, state=ADDED, bytes=8722, packets=89, duration=89, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}, IN_PORT{port=2}]
      treatment=[OUTPUT{port=3}]
   id=30000b88a833e, state=ADDED, bytes=8722, packets=89, duration=89, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}, IN_PORT{port=3}]
      treatment=[OUTPUT{port=1}]
deviceId=of:000000000000000c, flowRuleCount=0
deviceId=of:000000000000000d, flowRuleCount=0
deviceId=of:000000000000000e, flowRuleCount=2
   id=30000b88a8e45, state=ADDED, bytes=8722, packets=89, duration=89, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}, IN_PORT{port=1}]
      treatment=[OUTPUT{port=3}]
   id=30000b88a8e82, state=ADDED, bytes=8722, packets=89, duration=89, priority=10, appId=org.onlab.onos.fwd
      selector=[ETH_TYPE{ethType=800}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}, IN_PORT{port=3}]
      treatment=[OUTPUT{port=2}]

As you can see from the above output, ONOS provides many details about he the flows at the switches. For example each flow entry defines a selector and treatment which is the set of traffic matched by the the flow entry and how this traffic should be handled. Notice as well that each flow entry it tagged by an appId (application id), this appId identifies which application installed this flow entry. This is a useful feature because it can help an admin identify which application may be misbehaving or consuming many resources.

Apps command

The apps command enables the user to list the applications currently running on ONOS.

onos> apps
id=1, name=org.onlab.onos.net.intent
id=2, name=org.onlab.onos.fwd

As shown above the tutorial ONOS has three applications loaded. One of them is the reactive forwarding applications, we will see the other two later in this tutorial.

Paths command

Given a network topology, ONOS computes all the shortest paths between any two nodes.  This is especially useful for your applications to obtain path information for either flow installation or some other use. The paths command takes two arguments, both of them are devices. To make things easy for you ONOS provides CLI autocompletion by simply hitting the <TAB> key.

onos> paths <TAB>
of:0000000000000001   of:0000000000000002   of:000000000000000b   
of:000000000000000c   of:000000000000000d   of:000000000000000e

ONOS lists device options for you, thereby making it easier to find the devices you would like. For example, the output of the command below shows two paths of equal costs.

onos> paths of:000000000000000b of:000000000000000e 
of:000000000000000b/1-of:0000000000000001/2==>of:0000000000000001/5-of:000000000000000e/1; cost=2.0
of:000000000000000b/2-of:0000000000000002/2==>of:0000000000000002/5-of:000000000000000e/2; cost=2.0

Intent Command

The intent command allows one to see what intents are stored in the system. Intents can be in several states:

  • SUBMITTED - The intent has been submitted and will be processed soon.
  • COMPILING - The intent is being compiled. This is a transient state.
  • INSTALLING - The intent is in the process of being installed. 
  • INSTALLED - The intent has been installed.
  • RECOMPILING - The intent is being recompiled after a failure.
  • WITHDRAWING - The intent is being withdrawn.
  • WITHDRAWN - The intent has been removed.
  • FAILED - The intent is in a failed state because it cannot be satisfied.

For more information about Intents go here.

onos> intents
id=0x0, state=INSTALLED, type=HostToHostIntent, appId=org.onlab.onos.gui
	constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]
id=0x1, state=WITHDRAWN, type=HostToHostIntent, appId=org.onlab.onos.cli
	constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]

Note: You will not see any intents until some have been added. In the next section of the tutorial, you will load the intent reactive forwarding application, which automatically adds intents as needed.

The command can also tell you what type of sub-intents the intent has been compiled to:

onos> intents -i
id=0x2, state=INSTALLED, type=HostToHostIntent, appId=org.onlab.onos.ifwd
    constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]
    installable=[
PathIntent{id=0x4, appId=DefaultApplicationId{id=2, name=org.onlab.onos.ifwd}, 
	selector=DefaultTrafficSelector{criteria=[ETH_SRC{mac=00:00:00:00:00:0D}, ETH_DST{mac=00:00:00:00:00:07}]}, 
	treatment=DefaultTrafficTreatment{instructions=[]}, constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}],	
	path=DefaultPath{src=ConnectPoint{elementId=00:00:00:00:00:0D/-1, portNumber=0},
						dst=ConnectPoint{elementId=00:00:00:00:00:07/-1, portNumber=0}, type=INDIRECT, state=ACTIVE, durable=false}},
PathIntent{id=0x5, appId=DefaultApplicationId{id=2, name=org.onlab.onos.ifwd},
	selector=DefaultTrafficSelector{criteria=[ETH_SRC{mac=00:00:00:00:00:07}, ETH_DST{mac=00:00:00:00:00:0D}]},
	treatment=DefaultTrafficTreatment{instructions=[]}, constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}], 	
	path=DefaultPath{src=ConnectPoint{elementId=00:00:00:00:00:07/-1, portNumber=0}, 
						dst=ConnectPoint{elementId=00:00:00:00:00:0D/-1, portNumber=0}, type=INDIRECT, state=ACTIVE, durable=false}}]

For example, this host to host intent has been compiled to two path intents with the appropriate traffic selections and actions computed on your behalf.

Intent Reactive Forwarding

Another sample application in ONOS is the intent reactive forwarding application. Rather than pushing flow entries for each packet it sees, the intent reactive forwarding application provisions an intent. In particular, it provisions a host to host intent which is a simple connectivity intent which enables the connectivity between two hosts. 

Out with the old, In with the new

First let's start by removing the old reactive forwarding application and load the intent reactive forwarding application.

onos> feature:uninstall onos-app-fwd
onos> feature:install onos-app-ifwd

NB: Notice the different bundle names: onos-app-fwd vs. onos-app-ifwd (Hint: there is an extra 'i' (wink))

Ok let's just make sure it is loaded correctly:

onos> apps
id=0, name=org.onlab.onos.net.intent
id=1, name=org.onlab.onos.fwd
id=2, name=org.onlab.onos.ifwd

So we can see that the intent forwarding application is correctly loaded. The appId for the Reactive Forwarding application remains, so if you reload that application it will get the same appId it had previously.

Intentionally React

Alright so let's forward some traffic. 

mininet> h21 ping h31
PING 10.0.0.13 (10.0.0.13) 56(84) bytes of data.
64 bytes from 10.0.0.13: icmp_seq=1 ttl=64 time=25.7 ms
64 bytes from 10.0.0.13: icmp_seq=2 ttl=64 time=1.73 ms
64 bytes from 10.0.0.13: icmp_seq=3 ttl=64 time=0.191 ms
64 bytes from 10.0.0.13: icmp_seq=4 ttl=64 time=0.079 ms
^C
--- 10.0.0.13 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 0.079/6.926/25.700/10.859 ms

 

So by using the flows command you can list the flows (by running the flows command) that the intent installed. So how is this different than the other application? Well the end result is the same but the process by which it was obtained it radically different. The intent reactive forwarding application has installed an intent between h21 and h31, as you can see by running the intents command:

onos> intents -i
id=0x0, state=INSTALLED, type=HostToHostIntent, appId=org.onlab.onos.ifwd
    constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]
    installable=[
PathIntent{id=0x1, appId=DefaultApplicationId{id=2, name=org.onlab.onos.ifwd}, 
	selector=DefaultTrafficSelector{criteria=[ETH_SRC{mac=00:00:00:00:00:0D}, ETH_DST{mac=00:00:00:00:00:07}]}, 
	treatment=DefaultTrafficTreatment{instructions=[]}, constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}],	
	path=DefaultPath{src=ConnectPoint{elementId=00:00:00:00:00:0D/-1, portNumber=0},
						dst=ConnectPoint{elementId=00:00:00:00:00:07/-1, portNumber=0}, type=INDIRECT, state=ACTIVE, durable=false}},
PathIntent{id=0x2, appId=DefaultApplicationId{id=2, name=org.onlab.onos.ifwd},
	selector=DefaultTrafficSelector{criteria=[ETH_SRC{mac=00:00:00:00:00:07}, ETH_DST{mac=00:00:00:00:00:0D}]},
	treatment=DefaultTrafficTreatment{instructions=[]}, constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}], 	
	path=DefaultPath{src=ConnectPoint{elementId=00:00:00:00:00:07/-1, portNumber=0}, 
						dst=ConnectPoint{elementId=00:00:00:00:00:0D/-1, portNumber=0}, type=INDIRECT, state=ACTIVE, durable=false}}]

 

So the intent forwarding app has pushed the intent you see above as evidenced by the appId field. The intent is a host to host intent which details the path along which the flows have been installed. If you would like to know more about intents or the intent framework in general have a look at this page.

Before we continue, let's remove the intent you just installed so that it doesn't get in the way of the intent gymnastics we are going to do in the next section.

onos> remove-intent <TAB>

The <tab> key will autocomplete the id that was associated the intent we just pushed. You should now see that there are no intents in the system.

onos> intents

This command will return nothing as there are no intents in the system.

State your intentions

One major advantage of using intents over simply using flow entries to program your network is that intents track the state of the network and reconfigure themselves in order to satisfy your intention. For example, if link were to go down the intent framework would reroute your intent (ie. your flows) onto an alternative path. But, what if there are no alternative path? Well, in this case the intent would enter the failed state and remain there until a path becomes available. Pretty cool, eh? Let's check this out in action.

Let's start by looking at the set of hosts know to ONOS. If you ran through this tutorial exactly there should be four hosts 

onos> hosts
id=00:00:00:00:00:01/-1, mac=00:00:00:00:00:01, location=of:000000000000000b/3, vlan=-1, ip(s)=[10.0.0.1]
id=00:00:00:00:00:07/-1, mac=00:00:00:00:00:07, location=of:000000000000000c/3, vlan=-1, ip(s)=[10.0.0.7]
id=00:00:00:00:00:0D/-1, mac=00:00:00:00:00:0D, location=of:000000000000000d/3, vlan=-1, ip(s)=[10.0.0.13]
id=00:00:00:00:00:13/-1, mac=00:00:00:00:00:13, location=of:000000000000000e/3, vlan=-1, ip(s)=[10.0.0.19]

 

Pick any any of these two hosts and install a host to host intent for them. 

onos> add-host-intent 00:00:00:00:00:01/-1 00:00:00:00:00:13/-1

This command will provision a path between 10.0.0.1 (h11) and 10.0.0.19 (h41) and you can see that the intent is installed.

onos> intents
id=0x9, state=INSTALLED, type=HostToHostIntent, appId=org.onlab.onos.cli
    constraints=[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]

So now that the intent is installed let's have a look what path it is using. Be careful here as the output from the tutorial and what you see may vary slightly as all alternate paths here have equal cost and therefore ONOS is free to pick either one.

onos> flows
deviceId=of:0000000000000001, flowRuleCount=2
   id=10000c364dd58, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=2}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=5}]
   id=10000c364ddb2, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=5}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=2}]
deviceId=of:0000000000000002, flowRuleCount=0
deviceId=of:000000000000000b, flowRuleCount=2
   id=10000c3659528, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=1}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=3}]
   id=10000c3659564, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=3}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=1}]
deviceId=of:000000000000000c, flowRuleCount=0
deviceId=of:000000000000000d, flowRuleCount=0
deviceId=of:000000000000000e, flowRuleCount=2
   id=10000c365a06b, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=1}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=3}]
   id=10000c365a0a7, state=ADDED, bytes=0, packets=0, duration=1781, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=3}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=1}]

We can see that the traffic flows between dpid 00:00:00:00:00:00:00:01 (s1) and 00:00:00:00:00:00:00:0b (s11). If you have trouble seeing this, refer to the topology diagram in the beginning of this tutorial.

 

Ok so let's teardown the link between s1 and s11, you may have to teardown the link between s2 and s11 so pay attention to the flows command output. This can be done in mininet by running:

mininet> link s1 s11 down

and let's have a look at the flows again.

onos> flows
deviceId=of:0000000000000001, flowRuleCount=0
deviceId=of:0000000000000002, flowRuleCount=2
   id=10000c364e119, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=2}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=5}]
   id=10000c364e173, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=5}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=2}]
deviceId=of:000000000000000b, flowRuleCount=2
   id=10000c3659547, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=2}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=3}]
   id=10000c3659565, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=3}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=2}]
deviceId=of:000000000000000c, flowRuleCount=0
deviceId=of:000000000000000d, flowRuleCount=0
deviceId=of:000000000000000e, flowRuleCount=2
   id=10000c365a08a, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=2}, ETH_SRC{mac=00:00:00:00:00:01}, ETH_DST{mac=00:00:00:00:00:13}]
      treatment=[OUTPUT{port=3}]
   id=10000c365a0a8, state=ADDED, bytes=0, packets=0, duration=1, priority=123, appId=org.onlab.onos.net.intent
      selector=[IN_PORT{port=3}, ETH_SRC{mac=00:00:00:00:00:13}, ETH_DST{mac=00:00:00:00:00:01}]
      treatment=[OUTPUT{port=2}]

Observe that the flows moved from  00:00:00:00:00:00:00:01 to  00:00:00:00:00:00:00:02 (s2) and the remaining flows remained untouched. How did this happen? Well when we tore down the link between s1 and s11, ONOS detected this change and informed all people interested by this event that the link went down. Therefore the intent service receives this information and realises that one of its intents is affected by this change and thus it recompiles the intent in light of this change which causes the intent to be installed on a different path.

This simple example shows that using intents is more powerful than simply installing flows. Intents maintain your intention (hence the name!) while retaining the ability to install them as is possible or most efficient. 

Up down up down

If you wish you can take down more links and see what happens. Obviously, if you partition the network then no flows will be installed, sadly ONOS doesn't grow links between switches yet. You can bring up links in mininet by:

mininet> link s1 s11 up

Have fun!

ONOS Graphical User Interface

First , lets reload our reactive forwarding application.

onos> feature:uninstall onos-app-ifwd
onos> feature:install onos-app-fwd

 

ONOS comes with a GUI. The GUI allows you to manipulate your network in a simple way.

You will need to load up the GUI bundle in ONOS, fortunately this is simple:

onos> feature:install onos-gui

To open the UI simply click on the 'ONOS GUI' icon. Initially, when the UI loads up you will see your network's topology over a map of the US. You can remove the map by hitting 'b'. In fact, the UI has a cheat sheet which can be toggled by hitting '/' which is easy to remember because it's the question mark key except you don't need to hit shift. 

Ok let's make all the hosts appear in the UI, we can do this by making the hosts talk on the network. The best way to do this is to run the pingall command at mininet.

mininet> pingall
*** Ping: testing ping reachability                                                                 
h11 -> h12 h13 h14 h15 h16 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h12 -> h11 h13 h14 h15 h16 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h13 -> h11 h12 h14 h15 h16 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h14 -> h11 h12 h13 h15 h16 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h15 -> h11 h12 h13 h14 h16 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h16 -> h11 h12 h13 h14 h15 h21 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h21 -> h11 h12 h13 h14 h15 h16 h22 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
h22 -> h11 h12 h13 h14 h15 h16 h21 h23 h24 h25 h26 h31 h32 h33 h34 h35 h36 h41 h42 h43 h44 h45 h46  
.....

The hosts will not appear initially, simply type 'h' in your browser window and they will appear. At this point you should see something roughly similar to the image below. 

 

GUI Features

GUI Cheat Sheet

At anytime you can pull up the GUI's cheat sheet by typing '/' (which is '?' without the pesky shift (wink)) and you will get a pane that looks like below.

Summary pane

The GUI comes with a very useful summary pane. It shows you a  summary of what is going on at this ONOS cluster.

Switch details

When you click on a switch a pane appears on the right hand side. This pane gives information about the switch as shown in the image below.

You my notice that the UI reports nine ports but you can only see eight, this is because OpenFlow switches have virtual ports that are hard to show on a UI. 

Shift click will unselect the switch and remove the pane

Instances

The GUI has the ability to show which ONOS instances are active. By hitting the 'i' key (it will be open by default) you will see a pane show up on the left hand side as shown below.

Notice that the glyphs for the switches changes color, this indicates which switches are controlled by which instance. This is useful to see at a glance which switches are controlled by which ONOS instance.

Install Intent

Ok let's install an intent using the UI. First select two hosts by clicking on one host then shift-click on another. Let's pick 10.0.0.20 and 10.0.0.9. Now a pane will appear on the right and side of the screen as here:

Now click on 'Create Host-to-host Flow', this actually provisions a host to host intent and lights up the path used by the intent. 

You can check that the intent was installed via the ONOS cli

onos> intents 
	id=0x223838ca, state=INSTALLED, type=HostToHostIntent, appId=org.onlab.onos.gui
	[LinkTypeConstraint{inclusive=false, types=[OPTICAL]}]

Now let's send some traffic on that intent. This will animate the link to show traffic and display how much traffic (counter value) is flowing through that link

mininet> h42 ping h23

 

 

 

 

Show all traffic

Another thing you can do is activate the 'All Traffic' mode in the UI. This will show you any traffic that is running on the network. Activate this command by hitting 'a'.

Play on

Now you know the main features of the UI. We encourage you to play around with it to find out what other features you can use and who knows may find a few bugs.

Exploring Further

Here we just scratched the surface of what ONOS can do in terms of controlling a network. We highly encourage you to continue using ONOS and perhaps start developing your own applications. Find out how to get started in this tutorial.


Return To : Tutorials and Walkthroughs

 

 

  • No labels

2 Comments

  1. Lumin Shi

    Hello! I am a new comer to ONOS and I currently have an issue about showing the current traffic on the gui component.

    I installed an intent between two hosts and then I did a ping from one host to another (with Mininet), however, there's no traffic I can see from the web gui (I did hit 'a' to enable that). Is there anything I should've known in order see the real time traffic?

    1. Prajakta Joshi

      Hello Lumin,
      Please use the onos-discuss@onosproject.org or onos-dev@onosproject.org for questions- you will get the quickest response that way from the ONOS community.
      Regards,
      Prajakta