Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
...
Prefix hijacking is a common phenomenon in the Internet that often causes routing problems and economic losses [13]. ARTEMIS [1,10] is a tool , usable by for network administrators, to that allows them detect in real-time and automatically mitigate prefix hijacking incidents against prefixes under their own prefixesadministrative control, by employing self-monitoring on the AS level. ARTEMIS employs real-time monitoring of BGP data (e.g., BGP updates exported by route collectors) and can: (a) detect a prefix hijacking attack within a few seconds from its launch, and (b) completely mitigate the hijack within a few minutes (e.g., 2-5 minutes in the initial experiments on the real Internet with the PEERING testbed [2]). This fast response time enables legitimate ASes to quickly counter the hijack based on data they observe themselves on the control plane.
The goal of this project is to implement ARTEMIS as a multi-module application running on top of ONOS [9], using the prior work and code-base of the SDN-IP project [3,8], as well as testing the application over a real BGP testbed such as PEERING [2]. The final objective is to have an open-source implementation of ARTEMIS running on top of a popular production-grade Network Operating System. This implementation will then enable researchers and operators to test miscellaneous BGP prefix mitigation strategies over real-world testbeds and production networks, and extract results that are relevant to today’s ISP operations; such results would be otherwise not possible to produce.
...
Basic knowledge of the BGP protocol and its best path selection algorithm is required in order to fully understand grasp the concepts of concept behind ARTEMIS. However, every user everyone can try follow the demo without this prior knowledge.
...
JSON Configuration File
The JSON Configuration File is the file that configuration file(network-cfg.json) contains the required configuration entries to monitor prefixes and check the validity of neighbors and paths. The following code block shows an example of the JSON configuration format for ARTEMIS which is used in the Demo Topology.
...