FUNCipv6Intent at 08 Jun 2016 20:41:02
commit 389f10819030763a39900e23d614b5afe1d9d23b (HEAD, origin/onos-1.6, onos-1.6)
Author: Thomas Vachuska [tom@onlab.us]
AuthorDate: Wed Jun 8 17:57:28 2016 -0700
Commit: Thomas Vachuska [tom@onlab.us]
CommitDate: Wed Jun 8 17:57:28 2016 -0700
Starting snapshot 1.6.0-SNAPSHOT
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
- 2.7 Checking that ONOS is ready - PASS
- 2.8 setup the ipv6NeighbourDiscovery - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Discover all hosts - PASS
- 13.1 Discover all hosts using pingall - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV6: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 1HOP: Add host intents between h1 and h3 - PASS
- 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS