Work in progress
The content of this page is still work in progress
P4 is a domain-specific language designed to allow programming of protocol-independent packet processors. Behavioral Model v2 (BMv2) is the reference P4 software switch. Initial support for this type of device has been included into ONOS 1.6 (Goldeneye) with the goal of providing a common groundwork to support programmable data planes in the next versions of ONOS.
This document will guide you through the necessary steps to program a network of BMv2 (virtual) devices using ONOS. This document assumes you are already familiar with ONOS, P4 and BMv2. In other words, we assume you already know how to run ONOS locally, write a P4 program, compile it for BMv2, build and run BMv2.
Features at a glance
By using ONOS 1.6, you'll be able to program a network of BMv2 devices with all the benefits of a logically centralized SDN platform. The following features are currently supported:
- Device discovery / disconnection events
JSON configuration swap
Packet-ins and packet-outs
Match-action table population (via flow rule/objective/intent service)
Port statistics collections
Flow statistics collection
The figure below sketches the high-level architecture of the BMv2 integration in ONOS (click to zoom).
On the northbound, ONOS provides a new Java API called "BMv2 Device Context Service" that can be used by applications to specify at runtime the JSON configuration of a given BMv2 device. Match-action tables can be populated using existing northbound APIs such as flow rule, flow objective or intents, with native support for non-standard P4 match and actions (via extension selectors and treatments).
On the southbound, ONOS speaks with BMv2 using Thrift. This project has been based on a customized version of the BMv2 “simple_switch” target that, differently from the original one, supports primitives to send packet-in events to the controller and to receive and transmit packet-outs. The source code of onos-bmv2 is available here.
BMv2 device context
In order to enforce a given JSON configuration on a given device, applications needs to provide a “BMv2 Device Context”. Device contexts are used to bind together in a Java class a BMv2 JSON configuration and an “Interpreter” implementation. Interpreters are used by ONOS to “understand” a given P4 program. They provide a mapping between ONOS objects and program-specific P4 objects (e.g. headers, actions, table names, etc.), allowing existing services and apps (e.g. host tracking, LLDP discovery, ARP proxy, reactive forwarding, etc.) to work with virtually any P4 program.
The Interpreter interface defines 3 types of mapping:
ONOS table ID ↔ P4 table name
Criterion's type ↔ P4 header instance’s field name
- Flow rule's treatment instance → BMv2 action instance
While for criteria and tables it is possible to specify a 1-to-1 relationship through a map, for Instructions the same is not possible or at least it wouldn't’ be convenient. The reason is that Instructions in ONOS are modeled after OpenFlow actions (which are protocol-dependent) and treatments (to be applied as a consequence of a match) are usually defined as a list of instructions. In P4 instead, actions are defined as a compound of low-level protocol-independent primitives (not expressible using ONOS Instructions), and, most important, P4 allows to specify only one action per table entry. Extracting the "meaning" of a given treatment instance and mapping it to a P4 action is not straightforward and might be progra-specific, That’s why we expect a P4 programmer using ONOS to write its own interpretation logic (i.e. Java code) that can map a given treatment instance to a BMv2 action instance.
When devices connect for the first time to ONOS a “default” context is automatically applied, triggering a configuration swap on the device and exposing to the system a default interpreter. Such a context is used to provide a minimum set of data plane capabilities for basic ONOS services and apps to work. The default context is based on a default.json BMv2 configuration, (compiled from default.p4) and default interpreter implementation.
FAQ regarding device contexts and interpreters
- Do I necessarily need to write an interpreter for my P4 program?
No, interpreters are optional, meaning that a context can be created with an “empty” interpreter. In this case, you can’t expect other ONOS services to work with that given context. When not using an Interpreter or when creating flow rules based on non-standard match or actions, developers can use BMv2 extension treatment and selectors.
- Do I need to provide a mapping for all the headers and actions defined in my P4 program?
No, you can provide a mapping for only some of them. The general advice is to provide a mapping for those criterions and treatments used by the other ONOS services and applications you need in order to run your applications. Most of the times you can re-use the default interpreter (provided that you write your own P4 program upon default.p4)
Non-standard match and actions
ONOS already provides means for applications to process traffic according to match and actions on non-standard header fields...
Developers guide (WIP)
ONOS+P4 development environment
- ONOS fork of BMv2
- Sample P4 programs
bmv2.py Mininet script
- Command samples to run a network of bmv2 devices connected to ONOS
BMv2 Device Context Service API
- Prototype API for device configuration management, to be promoted to core APIs in the future
- How to set a context for a given device?
- Configuration swap enforcement
- Why do I need to register the interpreter's class loader?
Known issues (WIP)