Master-FUNCintent

commit 879ed7c6ae0189ff24090cce4609a39d7b43da33 (HEAD, origin/master, origin/HEAD, master)
Author: Madan Jampani [madan@onlab.us]
AuthorDate: Thu Jul 23 20:33:08 2015 -0700
Commit: Madan Jampani [madan@onlab.us]
CommitDate: Thu Jul 23 20:33:08 2015 -0700

Disable the new change notification support as it seems to have caused a regression

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: TESTING HOST INTENTS - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: TESTING POINT INTENTS - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• SDNIP-TCP: Add point intent failed
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• SDNIP-ICMP: Add point intent failed
• 2000.6 DUALSTACK1: Add point intents between h1 and h9 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: TESTING SINGLE TO MULTI POINT INTENTS - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV4: Add single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: TESTING MULTI TO SINGLE POINT INTENTS - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• NOOPTION: Failed to add multi point to single point intents
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: TESTING HOST INTENTS - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - FAIL
• IPV4: Add host intent failed
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• DUALSTACK1: Add host intent failed
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
• DUALSTACK2: Add host intent failed
• 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
• 1HOP: Add host intent failed
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: TESTING POINT INTENTS - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• SDNIP-TCP: Add point intent failed
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• SDNIP-ICMP: Add point intent failed
• 2000.6 DUALSTACK1: Add point intents between h1 and h9 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
• 1HOP: Add point intent failed

Case 3000: TESTING SINGLE TO MULTI POINT INTENTS - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV4: Add single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: TESTING MULTI TO SINGLE POINT INTENTS - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• NOOPTION: Failed to add multi point to single point intents
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - FAIL
• VLAN: Failed to add multi point to single point intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: TESTING HOST INTENTS - FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
• VLAN1: Add vlan host intent failed
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: TESTING POINT INTENTS - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• NOOPTION: Add point intent failed
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• IPV4: Add point intent failed
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• IPV4_2: Add point intent failed
• 2000.4 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h1 and h9 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• VLAN: Add point intent failed
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
• 1HOP: Add point intent failed

Case 3000: TESTING SINGLE TO MULTI POINT INTENTS - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV4: Add single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - FAIL
• IPV4_2: Failed to add single point to multi point intents
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: TESTING MULTI TO SINGLE POINT INTENTS - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• NOOPTION: Failed to add multi point to single point intents
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - FAIL
• VLAN: Failed to add multi point to single point intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 1000: TESTING HOST INTENTS - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 1000.1 IPV4: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS

Case 2000: TESTING POINT INTENTS - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• NOOPTION: Add point intent failed
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• SDNIP-TCP: Add point intent failed
• 2000.5 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• SDNIP-ICMP: Add point intent failed
• 2000.6 DUALSTACK1: Add point intents between h1 and h9 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• VLAN: Add point intent failed
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 3000: TESTING SINGLE TO MULTI POINT INTENTS - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV4: Add single point to multi point intents - PASS
• 3000.3 IPV4_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: TESTING MULTI TO SINGLE POINT INTENTS - FAIL

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - FAIL
• NOOPTION: Failed to add multi point to single point intents
• 4000.2 IPV4: Add multi point to single point intents - PASS
• 4000.3 IPV4_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS