1.5-FUNCintentRest

commit 44022c6cc25b3211632578da85430efa0cca051d (HEAD, origin/onos-1.5, onos-1.5)
Author: Jonathan Hart [jono@onlab.us]
AuthorDate: Wed Mar 30 13:31:00 2016 -0700
Commit: Jonathan Hart [jono@onlab.us]
CommitDate: Wed Mar 30 20:35:14 2016 +0000

Remove usage of InetAddress.getLocalHost() in unit tests.

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS
• 1000.7 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 17: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 17.1 Stopping and Removing Scapy Host Components - PASS
• 17.2 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - FAIL

• 15.1 Send packets from each host to the first host and confirm onos discovery - FAIL
• ONOS incorrectly discovered hosts
• 15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 1000.1 IPV4: Add and test host intents between h1 and h9 - FAIL
• Assertion result for IPV4 host intent with mac addresses
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
• Assertion Result for dualstack2 host intent
• 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
• Assertion Result for 1HOP for IPV4 same switch
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
• Assertion Result vlan IPV4
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - FAIL
• Assertion Result different VLAN negative test
• 1000.7 Confirm that ONOS leadership is unchanged - FAIL
• ONOS Leader Mismatch

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - PASS

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents